Migration tasks
Issue 2.1 June 2006 629
Migration tasks:
● Accessing the media server on page 632
● Checking system status on page 633
● Verifying the license file on page 633
● Restoring data for a migration (S8710 only) on page 633
● Adding IPSI translations to Communication Manager on page 635
● Adding IPSI information on page 636
● Setting IPSI duplication (high-reliability critical-reliability only) on page 636
● Setting the alarm activation level on page 637
● Backing up translations on page 637
● Verifying hardware on page 638
● Changing the IP600 control chassis to a port network on page 638
● Turning off the power to the control cabinet on page 638
● Replacing the processor circuit pack on page 639
● Replacing the TN799C C-LAN circuit pack on page 639
● Installing TN771 Maintenance/Test circuit pack on page 640
● Connecting to the media server on page 640
Post-migration administration:
● Accessing the server command line interface with SSH protocol on page 640
● Using static addressing on page 642
● Clearing the ARP cache on the laptop computer on page 643
● Logging in to the IPSI on page 643
● Setting the control interface on page 644
● Setting the VLAN and diffserv parameters on page 645
● Resetting the IPSI on page 645
● Verifying IPSI translations on page 646
● Verifying IPSI connectivity on page 647
● Enabling control of the IPSI on page 647
● Verifying the customer data on page 647
● Verifying circuit pack locations on page 648
● Verifying circuit pack insertion on page 648
● Verifying the IP addresses on page 648
To Next Page
Loading...
