Migrating from a DEFINITY Server SI in an SCC to an S8700-Series Media Server with Fiber-PNC
662 Upgrading, Migrating, and Converting Media Servers and Gateways
Migration tasks:
● Accessing the media server maintenance web interface on page 683
● Checking system status on page 684
● Verifying the license file on page 684
● Restoring data for a migration (S8710 only) on page 684
● Adding IPSI translations to Communication Manager on page 686
● Setting IPSI duplication (high-reliability critical-reliability only) on page 687
● Adding IPSI information on page 688
● Setting the alarm activation level on page 688
● Backing up translations on page 689
● Verifying hardware on page 689
● Removing the processor port network control cabinet on page 689
● Installing the expansion control media gateway on page 690
● Stacking the port media gateways on page 691
● Installing IPSI and maintenance circuit packs on page 691
● Installing Expansion Interface circuit packs on page 691
● Turning on the media gateway on page 692
Post-migration administration:
● Accessing the server command line interface with SSH protocol on page 692
● Using DHCP addressing on page 694
● Administering the location assignment on page 694
● Setting the switch ID on page 695
● Setting the cabinet number on page 696
● Verifying IPSI translations on page 696
● Verifying IPSI connectivity on page 697
● Enabling control of the IPSI on page 697
● Verifying the customer data on page 698
● Verifying circuit pack locations on page 698
● Verifying circuit pack insertion on page 698
● Verifying the IP addresses on page 698
● Checking the link status on page 699
● Upgrading firmware on page 699
To Next Page
Loading...
