Migrating an Avaya IP600/S8100 to an S8700-Series Media Server with IP-PNC
842 Upgrading, Migrating, and Converting Media Servers and Gateways
When you are on site for a migration from a DEFINITY system, complete the following
additional tasks before you start the migration:
Verify the correct cables for
the TN2312BP Internet
Protocol Server Interface
(IPSI) circuit packs.
The cables must be labeled and run from the control
hardware rack to the port networks. Appropriate
connectivity must be provided.
Verify that you have all
necessary equipment
onsite.
For the list of required hardware, see Installing and
Configuring the Avaya S8700-Series Media Server
(03-300145).
9
Task Description
The customer supplies an
EIA 310D (or equivalent)
standard 4-post, 19-inch
(48-centimeter), equipment
rack is installed correctly
and solidly secured.
Ensure that you have the screws that come with the
rack. Ensure that the rail kit for the Avaya-supplied
UPS is installed on the rack or available for
installation. For more information on how to install the
rail, see the documentation that comes with the rail kit.
Verify that cables for the
TN2312BP Internet Protocol
Server Interface (IPSI)
circuit packs are labeled
and that appropriate
connectivity is provided.
The TN2312BP Internet Protocol Server Interface
(IPSI) circuit packs runs from the control hardware
rack to the port networks.
Verify that you have the
license file and that the file
includes the licensed
features.
Use the License File link on the Maintenance Web
Interface to verify.
Verify that you have the
Avaya authentication file.
Use the License File link on the Maintenance Web
Interface to verify.
9
Task Description
2 of 2
To Next Page
Loading...
