On active S8710 Media Server
Issue 2.1 June 2006 881
4. On the Select Release Version window, ensure that the Build line and OK are highlighted.
Press Enter to partition the hard disk and reformat the partitions.
Once the drive is configured correctly, the program starts the installation process and
reports the progress.
These processes can take up to 20 minutes. When the media server is ready to reboot, the
CD-ROM drive drawer opens. Remove the CD-ROM from the drive at this time.
The reboot can take up to 3 minutes. The Telnet session ends automatically.
5. Disconnect from the active media server and connect to the other media server.
6. Repeat Turning on both media servers
on page 878 through Installing Communication
Manager on page 880.
To Next Page
Loading...
