Avaya S8100 Series - Page 985

On first S8720 Media Server
Issue 2.1 June 2006 985
Figure 68: Duplication and control network cables for software duplication
Figure notes:
1. Duplication cable (Crossover) — Eth0
2. Services port — Eth1
3. CNA (also LAN for nondedicated control network) — Eth2
4. CNB (if used) — Eth3
5. LAN (if dedicated control network) — Eth4
6. CNC (if used) — Eth5
2. Connect the modem to one of the USB ports.
3. Connect the USB flash drive to one of the USB ports.
4. Connect the power cord to the rear of the media server to turn on the server.
cadsnetb LAO 092305
2
3
iLO
VDCI
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
2
1
4
3
5
6
2 1