Avaya S8100 Series - Page 496

Migrating a DEFINITY Server SI Direct-Connect in an SCC to a Direct-Connect
496 Upgrading, Migrating, and Converting Media Servers and Gateways
Figure 13: Simplex reliability ribbon cable connection
9. Push the tabs on the ends of the connector inward to lock the connector in place.
10. Thread the ribbon through the slot on the front panel.
11. Fully insert the circuit packs.
12. In the rest of the empty slots, insert Z100C apparatus blanks.
13. Assign the switch ID and the cabinet ID to the TN2312BP Internet Protocol Server Interface
(IPSI) circuit pack that you just inserted. For more information, see Assigning IP addresses
to the IPSI circuit packs on page 537.
Note:
Note: For consistency, use the ribbon in the front for connectivity. Do not use ICCC.
S
E
R
V
I
C
E
N
E
T
W
O
R
K
C
L
K
A
L
A
R
M
S
E
M
E
R
T
R
M
A
J
M
IN
W
R
N
AC
K
O
N
O
F
F
AU
T
O
cadsdupx KLC 072502
A
B