Migrating a DEFINITY Server SI Direct-Connect in an SCC to a Direct-Connect
500 Upgrading, Migrating, and Converting Media Servers and Gateways
!
WARNING:
WARNING: Locate the ferrite as close to the exit of the media gateway as possible. If the
ferrite is not located as close to the exit as possible, the cable can pick up
electromagnetic interference (EMI) from inside the cabinet.
5. Connect the green CAT5 cable to the bottom connector on the front of the TN2312BP
Internet Protocol Server Interface (IPSI) circuit pack in media gateway A (CAT5 cable
connected to the IPSI on page 500).
Figure 17: CAT5 cable connected to the IPSI
C
L
K
S
E
R
V
I
C
E
N
E
T
W
O
R
K
A
L
A
R
M
S
E
M
E
R
T
R
M
A
J
M
I
N
W
R
N
AC
K
ON
OFF
AUTO
cadscat3 KLC 032602
To Next Page
Loading...
