Avaya S8100 Series - Page 534

Migrating a DEFINITY Server SI Direct-Connect in an MCC to a Direct-Connect
534 Upgrading, Migrating, and Converting Media Servers and Gateways
6. Thread the ribbon through the slot on the front panel (Simplex reliability ribbon cable
connection on page 534).
7. Insert the TN775D Maintenance (EPN) circuit pack part way into the MAINTENANCE slot.
8. Attach the other end of the short ribbon cable to the top connector on the component side of
the TN775D Maintenance (EPN) circuit pack with the red line on the bottom (Simplex
reliability ribbon cable connection on page 534).
Figure 22: Simplex reliability ribbon cable connection
9. Push the tabs on the ends of the connector inward to lock the connector in place.
10. Thread the ribbon through the slot on the front panel.
11. Fully insert the circuit packs.
12. In the rest of the empty slots, insert Z100C apparatus blanks.
S
E
R
V
I
C
E
N
E
T
W
O
R
K
C
L
K
A
L
A
R
M
S
E
M
E
R
T
R
M
A
J
M
IN
W
R
N
AC
K
O
N
O
F
F
AU
T
O
cadsdupx KLC 072502
A
B