Premigration administration
Issue 2.1 June 2006 673
Figure 37: Duplex ribbon cable connection
10. Push the tabs on the ends of the connector inward to lock the connector in place.
11. Thread the ribbon through the lower slot on the faceplate of the TN775D Maintenance
(EPN) circuit pack.
12. For high-reliability or critical-reliability configurations, use the pass-through tool to feed the
long ribbon cable through media gateway A (Figure 38: Ribbon cable placement with the
pass-through tool on page 674).
S
E
R
V
I
C
E
N
E
T
W
O
R
K
CLK
A
LA
RM
S
EM
ER
TR
M
AJ
M
IN
W
RN
ACK
O
N
O
F
F
AU
T
O
cadsdupx KLC 072502
A
B
To Next Page
Loading...
