Migration tasks
Issue 2.1 June 2006 755
Note:
Note: You must install the new Communication Manager license file on the media
server before you make the change or the system will not run.
Perform the following tasks to convert a processor port network to a port network (MCC).
Premigration administration:
● Connecting to the processor on page 762
● Verifying administration and system status on page 763
● Recording all busyouts on page 763
● Recording node names and IP addresses on page 764
● Saving translations on page 764
Migration tasks:
● Accessing the media server maintenance web interface on page 765
● Checking system status on page 765
● Verifying the license file on page 765
● Transferring translations on page 766
● Disconnecting from the active media server on page 766
● Connecting to the standby media server on page 766
● Disconnecting from the standby media server on page 766
● Connecting to the active media server on page 767
● Copying translation files from the MO disk to the active S8700-Series Media Server on
page 767
● Disconnecting from the active media server on page 769
● Connecting to the standby media server on page 770
● Disconnecting from the standby media server on page 770
● Connecting to the active media server on page 770
● Installing the translations on page 770
● Restoring data for a migration on page 771
● Adding IPSI translations to Communication Manager on page 773
● Setting IPSI duplication (high-reliability critical-reliability only) on page 774
● Adding IPSI information on page 775
● Setting the alarm activation level on page 775
● Backing up translations on page 776
To Next Page
Loading...
