Migrating an Avaya IP600/S8100 to an S8700-Series Media Server with IP-PNC
840 Upgrading, Migrating, and Converting Media Servers and Gateways
CAUTION:
Be sure to do this step
before freezing translations.
Check the Dial Plan screen
(or the Dial Plan Analysis
Table screen depending on
the release) for 0 assigned
as attd.
If there are none, check the Attendant Console
screens for any buttons with attd-qcalls or attd-qtime
btns. Remove these if 0 is not assigned as attd.
Replace any TN775/B/C
maintenance circuit packs.
Replace the TN775/B/C circuit packs with TN775D
circuit packs in any EPN that contains an IPSI.
About 2 weeks before the
migration, freeze the
translations.
● Collect the
translations locally by
a spare flash card.
For more information on where and how to send the
translations, contact the STS scheduling desk at
720-444-9418.
STS then updates the translations to the latest
version. This process can take 2 weeks. STS returns
the translation reports and translation files to the
project manager by e-mail who sends them to the field
technician.
Verify that you have the
appropriate logins and the
passwords to access the
media servers and the
server complex
components.
When you have finished installing the authentication
file, Communication Manager has a password for all
Avaya logins, including craft. This password is unique
to the media server of the customer. You can use the
password the next time you log in as craft, provided
you access the media server through the Services
port. You do not need an ASG challenge/response to
log in this way, even though every other means of craft
access still requires an ASG challenge/response.
This unique craft password remains valid a new
authentication file is installed.
Copy the translation file to a
directory on the Services
laptop.
File size usually is in the range of 1-4 megabytes.
9
Task Description
3 of 3
To Next Page
Loading...
