Upgrading Communication Manager from 2.x to 3.1 on an S8300 Media Server
86 Upgrading, Migrating, and Converting Media Servers and Gateways
4. Upgrade the S8300B,
using the Web Interface,
Manage Software
screens.
See "Copying the software
and firmware files to the
server" and "Installing new
software" in Chapter 12.
● Copy files from the Server CD.
● Install files on the S8300B.
● Make upgrade permanent.
!
CAUTION:
CAUTION: When you are upgrading the media
server as a primary controller, you must
check Product Support Notice #739U
for the supported upgrade paths. If you
attempt to upgrade the media server to
a release that is not supported as an
upgrade path, you might corrupt the
translations.
Also, you must check PSN #739U for
compatibility of software loads between
the primary controller and any LSPs or
ESSs. If the software loads of the
primary controller and the LSPs/ESSs
are incompatible, then file
synchronization between the primary
controller and the LSPs/ESSs can
cause translation corruption on the
LSPs/ESSs.
To check PSN #739U, from any
computer, access http://
support.avaya.com. Select Product
Support Notices > View All Documents
> PSN #739U.
5. Install post-upgrade
service pack file.
See "Installing
post-upgrade
Communication Manager
service pack file from your
laptop, if any" in Chapter
12.
Task Steps/Comments
2 of 4
To Next Page
Loading...
