Dell S4810 - Show Config; Show Spanning-Tree Mst Configuration

show config
View the current configuration for the mode. Only non-default values are shown.
S4810
Syntax
show config
Command
Modes
MULTIPLE SPANNING TREE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Introduced on the E-Series.
Example
Dell(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
max-hops 5
Dell(conf-mstp)#
show spanning-tree mst configuration
View the multiple spanning tree configuration.
S4810
Syntax
show spanning-tree mst configuration
Command
Modes
• EXEC
• EXEC Privilege
1134
Multiple Spanning Tree Protocol (MSTP)