Dell S4810 - Clear Ethernet Cfm Traceroute-Cache

Parameters
seconds Enter a transmit interval. The intervals are 1, 10, 60, and 600.
Defaults 10 seconds
Command
Modes
ECFM DOMAIN
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
clear ethernet cfm traceroute-cache
Delete all link trace cache entries.
S4810
Syntax
clear ethernet cfm traceroute-cache
Defaults none
Command
Modes
ECFM DOMAIN
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
166
802.1ag