Dell S4810 - Service-Policy Input

Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Related
Commands
rate shape — shapes traffic output as part of the designated policy.
qos-policy-output — creates a QoS output policy.
service-policy input
Apply an input policy map to the selected interface.
S4810
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy
input policy-map-name [layer2] command.
Parameters
policy-map-
name
Enter the name for the policy map in character format (32
characters maximum). You can identify an existing policy
map or name one that does not yet exist.
layer2 (OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is
Layer 3.
Defaults Layer 3
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Usage
Information
You can attach a single policy-map to one or more interfaces to specify the
service-policy for those interfaces. A policy map attached to an interface can be
modified.
1366
Quality of Service (QoS)