Dell S4810 - Redundancy Synchronize

-- Switch Fabric Modules --
Slot Status
--------------------------------------
0 active
1 active
Dell#configure
Dell(conf)#redundancy sfm standby
Taking secondary SFM offline...
!
Dell(conf)#do show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
-----------------------------------------
0 active
1 standby
Dell(conf)#no redundancy sfm
Taking secondary SFM online...
!
10Dell(conf)#do show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
-------------------------------------------
0 active
1 active
redundancy synchronize
Manually synchronize data once between the Primary RPM and the Secondary RPM.
S4810
Syntax
redundancy synchronize [full | persistent-data | system-data]
Parameters
full Enter the keyword full to synchronize all data.
persistent-data Enter the keywords persistent-data to synchronize the
startup configuration between RPMs.
system-data Enter the keywords system-data to synchronize persistent-
data and the running configuration file, event log, SFM and
line card states.
Default Not configured.
Command
Modes
EXEC Privilege
High Availability (HA)
707