Dell S4810 - Show Bootvar

Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the C-Series and E-Series.
Example
Dell#show boot system stack-unit 0
Current system image information in the system:
=============================================
Type Boot Type A B
---------------------------------------------------------------
-
Stack-unit 0 FLASH BOOT 9-0(2-1) 9-0(2-0)
[boot]
Dell#
show bootvar
Display the variable settings for the boot parameters.
S4810
Syntax
show bootvar
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
File Management
75