Dell S4810 - Show Processes Restartable; Show Redundancy

show processes restartable
Display the processes and tasks configured for restartability.
S4810
Syntax
show processes restartable [history]
Parameters
history Display the last time the restartable processes crashed.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.4.1.0 Introduced on the E-Series.
Example
Dell#sho processes restartable
------------------------------------------------------
Process name State How many times restarted Timestamp last
restarted
-------------------------------------------------------
radius enabled 0 [-]
tacplus enabled 0 [-]
-------------------------------------------------------
Dell#show processes restartable history
--------------------------------------------------------
Process name Timestamp last crashed
---------------------------------------------------------
radius [5/23/2001 10:11:47]
----------------------------------------------------------
Related
Commands
process restartable
show redundancy
Display the current redundancy configuration.
S4810
Syntax
show redundancy
High Availability (HA)
709