Dell S4810 - Ip Dhcp Snooping Database Renew; Ip Dhcp Snooping Trust

ip dhcp snooping database renew
Renew the binding table.
S4810
Syntax
ip dhcp snooping database renew
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the E-Series.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
ip dhcp snooping trust
Configure an interface as trusted.
S4810
Syntax
[no] ip dhcp snooping trust
Defaults Untrusted
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
632
Dynamic Host Configuration Protocol (DHCP)