Dell S4810 - Default-Information Originate

Router ID:223.255.255.254, Area ID:0, Chksum:af8f, Inst:0,
from Te 0/36
Dell#
Command
Fields
Lines Beginning
With or Including
Description
OSPFv3... Debugging is on for all OSPFv3 packets and all interfaces.
05:21:01 Displays the time stamp.
Sending Ver:3 Sending OSPF3 version..
type: Displays the type of packet sent:
• 1 - Hello packet
• 2 - database description
• 3 - link state request
• 4 - link state update
• 5 - link state acknowledgement
• 7 - external LSA
• 8 - link-state advertisement (OSPFv3)
• 9 - link local LSA (OSPFv2), Intra-Area-Prefix LSA
(OSPFv3)
• 11 - grace LSA (OSPFv3)
Length: Displays the packet length.
Router ID: Displays the OSPF3 router ID.
Area ID: Displays the Area ID.
Chksum: Displays the OSPF3 checksum.
default-information originate
Configure the Dell Networking OS to generate a default external route into an OSPFv3 routing domain.
S4810
Syntax
default-information originate [always] [metric metric-value]
[metric-type type-value] [route-map map-name]
To return to the default values, use the no default-information originate
command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that
default route information must always be advertised.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number to
configure a metric value for the route. The range is from 1 to
16777214.
1244
Open Shortest Path First (OSPFv2 and OSPFv3)