Dell S4810 - Show Run Iscsi

show run iscsi
Display all globally configured non-default iSCSI settings in the current Dell Networking OS session.
S4810
Syntax
show run iscsi
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version
8.3.16.0
Introduced on MXL 10/40GbE Switch IO Module.
Related
Commands
• show iscsi — displays the currently configured iSCSI settings.
• show iscsi session — displays detailed information about active iSCSI sessions
on the switch.
• show iscsi session detailed — displays detailed information on active iSCSI
sessions on the switch.
960
iSCSI Optimization