Dell S4810 - Aaa Authorization Commands

aaa authorization commands
Set parameters that restrict (or permit) a user’s access to EXEC and CONFIGURATION level commands.
S4810
Syntax
aaa authorization commands level {name | default} {local ||
tacacs+ || none}
Undo a configuration with the no aaa authorization commands level
{name | default} {local || tacacs+ || none} command.
Parameters
commands
level
Enter the keyword commands then the command privilege
level for command level authorization.
name Define a name for the list of authorization methods.
default Define the default list of authorization methods.
local Use the authorization parameters on the system to perform
authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter the keyword none to apply no authorization.
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.1.1.0 Added support for RADIUS.
Security
1455