Dell S4810 - Description; Match As-Path

description
Add a description to this route map.
S4810
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the route map (80 characters
maximum).
Defaults none
Command
Modes
ROUTE-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
pre-Version
7.7.1.0
Introduced.
Related
Commands
route-map — enables a route map.
match as-path
To match routes that have a certain AS number in their BGP path, configure a filter.
S4810
Syntax
match as-path as-path-name
To delete a match AS path filter, use the no match as-path as-path-name
command.
Parameters
as-path-name Enter the name of an established AS-PATH ACL, up to 140
characters.
272
Access Control Lists (ACL)