Dell S4810 - Show Qos Policy-Map-Output

qos-policy-
input qos-
policy-name
Enter the keyword qos-policy-input then the QoS policy
name.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 E-Series Only: Added Trust IPv6 diffserv.
pre-Version
6.1.1.1
Introduced on the E-Series.
Example
Dell#show qos policy-map-input
Policy-map-input PolicyMapInput
Aggregate Qos-policy-name AggPolicyIn
Queue# Class-map-name Qos-policy-name
0 ClassMap1 qosPolicyInput
Dell#
show qos policy-map-output
View the output QoS policy map details.
S4810
Syntax
show qos policy-map-output [policy-map-name] [qos-policy-output
qos-policy-name]
Parameters
policy-map-
name
Enter the policy map name.
Quality of Service (QoS)
1373