show ip bgp community
View information on all routes with Community attributes or view specific BGP community groups.
S4810
Syntax
show ip bgp [vrf vrf-name] [ipv4 unicast] community [community-
number] [local-as] [no-export] [no-advertise]
Parameters
vrf vrf-name (OPTIONAL) Enter the keywords vrf and then the name of
the VRF to view information either on all routes with
community attributes or specific BGP community routes
corresponding to that VRF.
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
community-
number
Enter the community number in AA:NN format where AA is
the AS number (2 bytes) and NN is a value specific to that
autonomous system.
You can specify up to eight community numbers to view
information on those community groups.
local-AS
Enter the keywords local-AS to view all routes with the
COMMUNITY attribute of NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03)
community attribute must not be advertised to external BGP
peers.
no-advertise
Enter the keywords no-advertise to view all routes
containing the well-known community attribute of
NO_ADVERTISE.
All routes with the NO_ADVERTISE (0xFFFFFF02) community
attribute must not be advertised to other BGP peers.
no-export
Enter the keywords no-export to view all routes containing
the well-known community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community
attribute must not be advertised outside a BGP
confederation boundary.
Command
Modes
• EXEC
• EXEC Privilege
456
Border Gateway Protocol
To Next Page
Loading...
