Dell S4810 - Show Ipv6 Interface

show ipv6 interface
Display the status of interfaces configured for IPv6.
S4810
Syntax
show ipv6 interface interface [brief] [configured]
[gigabitethernet slot | slot/port] [loopback interface-number]
[managementethernet slot/port] [port-channel number] [stack-
unit id] [tengigabitethernet slot | slot/port] [fortyGigE slot
| slot/port] [tunnel tunnel-id] [vlan vlan-id]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a Loopback interface, enter the keyword Loopback
then a number from 0 to 16383.
• For the Null interface, enter the keyword null then zero
(0).
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For stacking, enter the keywords stack-unit then the
stack-unit ID.
• For a tunnel interface, enter the keyword tunnel then
the tunnel ID.
• For a VLAN interface, enter the keyword VLAN.
• For a port channel interface, enter the keywords port-
channel.
brief (OPTIONAL) View a summary of IPv6 interfaces.
configured (OPTIONAL) View information on all IPv6 configured
interfaces.
gigabitethernet (OPTIONAL) View information for an IPv6 gigabitethernet
interface.
managementet
hernet slot/
port
(OPTIONAL) View information on an IPv6 Management port.
Enter the slot number (0-1) and port number zero (0).
loopback (OPTIONAL) View information for IPv6 Loopback interfaces.
port-channel (OPTIONAL) View information for IPv6 port channels.
tengigabitether
net
(OPTIONAL) View information for an IPv6 tengigabitethernet
interface.
fortyGigE (OPTIONAL) View information for an IPv6
fortygigabitethernet interface.
stack-unit id (OPTIONAL) View information for stacking.
942
IPv6 Basics