Dell S4810 - Show Fip-Snooping Enode

show fip-snooping enode
Display information on the ENodes in FIP-snooped sessions, including the ENode interface and MAC
address, FCF MAC address, VLAN ID and FC-ID.
S4810
Syntax
show fip-snooping enode [enode-mac-address]
Parameters
enode-mac-
address
Enter the MAC address of the ENodes to display.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Usage
Information
The following describes the show fip-snooping enode command shown in the
following example.
Field Description
ENode MAC MAC address of the ENode.
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF.
VLAN VLAN ID number the session uses.
FC-ID Fibre Channel session ID the FCF assigns.
Example
Dell# show fip-snooping enode
Enode MAC Enode Interface FCF MAC VLAN FC-ID
--------- --------------- ------- ---- -----
d4:ae:52:1b:e3:cd Te 0/11 54:7f:ee:37:34:40 100
62:00:11
FCoE Transit
667