Dell S4810 - Description

description
Enables you to specify a descriptive name for a customer VRF.
S4810
Syntax
description string
To delete the descriptive name for a customer VRF, use the no description
string command.
Parameters
string Enter a descriptive name for the VRF.
Defaults None.
Command
Modes
VRF MODE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Introduced on the S-Series.
Usage
Information
Use this command to specify a descriptive name for a VRF.
ip vrf forwarding
Enables you to attach an interface to a VRF.
S4810
Syntax
ip vrf forwarding {vrf-name | management}
To delete an interface associated with a configured VRF, use the no ip vrf
forwarding {
vrf-name | management} command.
Parameters
vrf-name Enter the name of the VRF that you want to create.
management Enter the name of the management VRF.
Defaults None (Interface is part of default VRF).
Command
Modes
INTERFACE-CONFIG
1704
Virtual Routing and Forwarding (VRF)