Dell S4810 - Show Ip Fib Linecard

0.0.0.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
Dell#
Example
(Member-Info)
Dell#show ip cam stack-unit 0 po 0 ecmp-group member-info
detail
Group Index Member Count Mac-Addr Port VLan ID Gateway
----------- ------------------------------- ------------------
0 2 00:01:e8:8a:d6:58 Te 0/3
0 1.1.1.2
00:01:e8:8a:d6:58 Te 0/8 0 2.1.1.2
Dell#
show ip fib linecard
View all forwarding information base (FIB) entries.
S4810
Syntax
show ip fib linecard slot-number [vrf vrf instance | ip-
address/prefix-list | summary]
Parameters
vrf instance (OPTIONAL) E-Series Only: Enter the keyword vrf then the
VRF instance name to show the FIB cache entries tied to that
VRF instance.
slot-number Enter the number of the line card slot.
ip-address
mask
(OPTIONAL) Enter the IP address of the network destination
to view only information on that destination. Enter the IP
address is dotted decimal format (A.B.C.D). Enter the mask in
slash prefix format (/X).
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
summary (OPTIONAL) Enter the keyword summary to view the total
number of prefixes in the FIB.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
892
IPv4 Routing