Dell S4810 - Show Interfaces Configured

MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:05:12
Queueing strategy: fifo
Time since last interface status change: 00:05:12
Related
Commands
show interfaces configured – displays any interface with a non-default
configuration.
show interfaces switchport – displays Layer 2 information about the interfaces.
show inventory (S-Series and Z-Series) – displays the S-Series and Z-Series switch
types, components (including media), Dell Networking OS version including
hardware identification numbers, and configured protocols.
show ip interface – displays Layer 3 information about the interfaces.
show range – displays all interfaces configured using the interface range
command.
show interfaces configured
Display any interface with a non-default configuration.
S4810
Syntax
show interfaces configured
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.4.1.0 Changed the organization of the display output.
780
Interfaces