Dell S4810 - Show Qos Dcb-Buffer-Threshold

thresholds for the buffer. This method of configuration enables you to effectively
manage and administer the behavior of lossless queues.
Example
Dell(conf)# dcb-policy buffer-threshold stack-unit all stack-
ports all test
show qos dcb-buffer-threshold
Displays the DCB buffer threshold assigned to a QoS policy. This command is supported on the platform.
Syntax
show qos dcb buffer-threshold {name}
Parameters
name Enter the name of the profile, which can be a string of up to
32 characters in length.
Command
Modes
EXEC
EXEC Privilege
Command
History
Version 9.3(0.0) Introduced on the S6000 platform.
Usage
Information
The following table describes the output fields displayed for the show command:
Field Description
Name Name of the DCB buffer threshold
profile
Buffer threshold parameters Buffer size allocated for the PFC
priority queue and the priority of the
queue
Example
Dell#show qos dcb buffer-threshold
Name : test1
Buffer threshold parameters:
pfc priority 0 buffer-size 40
pfc priority 3 buffer-size 50
584
Data Center Bridging (DCB)