Dell S4810 - Show Qos Qos-Policy-Input

qos-policy-
output qos-
policy-name
Enter the keyword qos-policy-output then the QoS
policy name.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Example
Dell#show qos policy-map-output
Policy-map-output PolicyMapOutput
Aggregate Qos-policy-name AggPolicyOut
Queue# Qos-policy-name
0 qosPolicyOutput
Dell#
show qos qos-policy-input
View the input QoS policy details.
S4810
Syntax
show qos qos-policy-input [qos-policy-name]
Parameters
qos-policy-
name
Enter the QoS policy name.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
1374
Quality of Service (QoS)