Dell S4810 - Show Qos Dcb-Input

Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version
8.3.16.0
Introduced on the MXL 10/40GbE Switch IO Module.
Example
(Summary)
Dell (conf-if-te-0/1)#show int te 0/1 pfc statistics
Interface TenGigabitEthernet 0/1
Priority Rx XOFF Frames Rx Total
Frames Tx Total Frames
---------------------------------------------------------------
-----------------------
-
0 0
0 0
1 0
0 0
2 0
0 0
3 0
0 0
4 0
0 0
5 0
0 0
6 0
0 0
7 0
0 0
show qos dcb-input
Displays the PFC configuration in a DCB input policy.
S4810
Syntax
show qos dcb-input [dcb-input-policy-name]
Parameters
dcb-input-
policyname
Enter the PFC profile.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Data Center Bridging (DCB)
535