Dell S4810 - Traceroute Cache Size; Traceroute Ethernet

traceroute cache size
Set the size of the link trace cache.
S4810
Syntax
traceroute cache size entries
Parameters
entries Enter the number of entries the link trace cache can hold.
The range is from 1 to 4095 entries.
Defaults 100 entries
Command
Modes
ETHERNET CFM
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
traceroute ethernet
Send a linktrace message to an MEP.
S4810
Syntax
traceroute ethernet domain [name | level] ma-name remote {mep-
id mep-id | mac-addr mac-address}
Parameters
domain name |
level
Enter the keyword domain then the domain name or level.
ma-name ma-
name
Enter the keyword ma-name then the maintenance
association name.
mepid mep-id Enter the MEP ID that is the trace target.
mac-addr
mac-address
Enter the MAC address of the trace target.
802.1ag
181