key passwords, the privileged command password, and console and virtual
terminal line access passwords.
To view passwords, use the show running-config command.
show privilege
View your access level.
S4810
Syntax
show privilege
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Example
Dell#show privilege
Current privilege level is 15
Dell#
Related
Commands
privilege level (CONFIGURATION mode) — assigns access control to different
command modes.
show users
Allows you to view information on all users logged in to the switch.
S4810
Syntax
show users [all]
1472
Security
To Next Page
Loading...
