Dell S4810 - Page 1473

Parameters
all (OPTIONAL) Enter the keyword all to view all terminal lines
in the switch.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
The following describes the show user command shown in the following
example.
Field Description
(untitled) Indicates with an asterisk (*) which terminal line you are
using.
Line Displays the terminal lines currently in use.
User Displays the user name of all users logged in.
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
Example
Dell#show user
Line User Host(s) Location
0 console 0 admin idle
* 3 vty 1 admin idle 172.31.1.4
Dell#
Related
Commands
username — enables a user.
Security
1473