Dell S4810 - Authorization

authorization
Apply an authorization method list to terminal lines.
S4810
Syntax
authorization {exec | commands level} method-list
Parameters
exec Enter the keyword exec to apply an EXEC level accounting
method list.
commands
level
Enter the keywords commands level to apply an EXEC and
CONFIGURATION level accounting method list.
method-list Enter a method list that you defined using the aaa
accounting exec
or aaa accounting commands.
Defaults none
Command
Modes
LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.3.1.0 Introduced on the E-Series.
Related
Commands
aaa authorization commands — sets the parameters that restrict (or permit) a user’s
access to EXEC and CONFIGURATION level commands
aaa authorization exec — sets the parameters that restrict (or permit) a user’s
access to EXEC level commands.
1454
Security