Dell S4810 - Show Calendar

Version 9.4.
(0.0)
Added support for VRF.
Version 9.0.2.0 Introduced on the S6000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.4.1.0 Added IPv6 support.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
You can configure multiple time-serving hosts (up to 250). From these time-
serving hosts, the Dell Networking OS chooses one NTP host with which to
synchronize. To determine which server was selected, use the show ntp
associations command.
Because many polls to NTP hosts can impact network performance, Dell
Networking recommends limiting the number of hosts configured.
Related
Commands
show ntp associations — displays the NTP servers configured and their status.
show calendar
Display the current date and time based on the switch hardware clock.
S4810
Syntax
show calendar
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
System Time and Date
1655