Dell S4810 - Show Link-Bundle Distribution

show link-bundle distribution
Display the link-bundle distribution for the interfaces in the bundle, type of bundle (LAG or ECMP), and
the most recently calculated interface utilization (either bytes per second rate or maximum rate) for each
interface.
S4810
Syntax
show link-bundle-distribution
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Example
Dell#show link-bundle-distribution
Link-bundle trigger threshold - 60
ECMP bundle - 5 Utilization[In Percent] - 0 Alarm State -
Inactive
Interface Line Protocol Utilization[In Percent]
Te 0/4 Up 5
Te 0/3 Up 30
Equal Cost Multi-Path (ECMP)
651