Dell S4810 - Show Tcp Statistics

• ARP Statistics: Rcvd: Replies: Object = f10ArpReplyRecv, OIDs =
1.3.6.1.4.1.6027.3.3.5.2.3
• ARP Statistics: Sent: Request: Object = f10ArpReqSent, OIDs =
1.3.6.1.4.1.6027.3.3.5.2.2
• ARP Statistics: Sent: Replies: Object = f10ArpReplySent, OIDs =
1.3.6.1.4.1.6027.3.3.5.2.4
• ARP Statistics: Sent: Proxy: Object = f10ArpProxySent, OIDs =
1.3.6.1.4.1.6027.3.3.5.2.5
Example
Dell#show ip traffic
Control Processor IP Traffic:
IP statistics:
Rcvd: 23857 total, 23829 local destination
0 format errors, 0 checksum errors, 0 bad hop count
0 unknown protocol, 0 not a gateway
0 security failures, 0 bad options
Frags: 0 reassembled, 0 timeouts, 0 too big
0 fragmented, 0 couldn't fragment
Bcast: 28 received, 0 sent; Mcast: 0 received, 0 sent
Sent: 16048 generated, 0 forwarded
21 encapsulation failed, 0 no route
ICMP statistics:
Rcvd: 0 format errors, 0 checksum errors, 0 redirects, 0
unreachable
0 echo, 0 echo reply, 0 mask requests, 0 mask replies, 0
quench
0 parameter, 0 timestamp, 0 info request, 0 other
Sent: 0 redirects, 0 unreachable, 0 echo, 0 echo reply
0 mask requests, 0 mask replies, 0 quench, 0 timestamp
0 info reply, 0 time exceeded, 0 parameter problem
UDP statistics:
Rcvd: 0 total, 0 checksum errors, 0 no port
0 short packets, 0 bad length, 0 no port broadcasts, 0
socket full
Sent: 0 total, 0 forwarded broadcasts
TCP statistics:
Rcvd: 23829 total, 0 checksum errors, 0 no port
Sent: 16048 total
ARP statistics:
Rcvd: 156 requests, 11 replies
Sent: 21 requests, 10 replies (0 proxy)
Routing Processor1 IP Traffic:
show tcp statistics
View information on TCP traffic through the switch.
S4810
Syntax
show tcp statistics {all | cp | rp1 | rp2}
Parameters
all Enter the keyword all to view all TCP information.
IPv4 Routing
911