Dell S4810 - Show Ip Bgp Inconsistent-As

r - redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Flaps
Duration Reuse Path
h 77.0.0.0/24 172.16.0.2 1
00:00:03 00:00:00
d 55.0.0.0/24 172.16.0.2 3
00:00:25 00:30:44 200 i
*> 66.0.0.0/24 172.16.0.2 1
00:00:23 00:00:00 200 i
Dell#*>n 66.66.77.77/32 0.0.0.0 0 32768 i
show ip bgp inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are
announced from the same neighbor AS but with a different AS-Path.
S4810
Syntax
show ip bgp [vrf vrf-name] [ipv4 unicast] inconsistent-as
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of
the VRF to view routes corresponding to the VRF that
contain inconsistent originating AS numbers.
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Added support for VRF.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Border Gateway Protocol
469