Dell S4810 - Show Crypto Ipsec Policy

Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
Example
Dell#show crypto ipsec transform-set
Transform-Set Name : dallas
Transform-Set refCnt : 0
AH Transform :
ESP Auth Transform :
ESP Encry Transform : 3des
Dell#
show crypto ipsec policy
Display the crypto policy configuration.
S4810
Syntax
show crypto ipsec policy
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
Example
Dell#show crypto ipsec policy
Policy name : West
Policy refcount : 1
Sequence Num : 10
SA Mode : IPSEC-MANUAL
Transform-Set Name : dallas
Peer IP Address :
Inbound AH SPI : 0
Inbound ESP Auth SPI : 0
Inbound ESP Encry SPI : 256
Inbound AH Key : [0]::
Inbound ESP Auth Key : [0]::
Inbound ESP Encry Key :
[96]::a5b6b42009d47895b420a5b6789509d4b420a5b6789509d4b420a5b67
89509d4b420a5b6789509d4b420a5b6789509d4
Outbound AH SPI : 0
Outbound ESP Auth SPI : 0
Outbound ESP Encry SPI: 257
Outound AH Key : [0]::
Outound ESP Auth Key : [0]::
Outound ESP Encry Key :
[96]::a5b6b42009d47895b420a5b6789509d4b420a5b6789509d4b420a5b67
89509d4b420a5b6789509d4b420a5b6789509d4
Match sequence Num : 0
Internet Protocol Security (IPSec)
835