Dell S4810 - Format Flash (S-Series)

Parameters
filename |
directory
name:
(OPTIONAL) Enter one of the following:
• For a file or directory on the internal Flash, enter
flash:// then the filename or directory name.
• For a file or directory on the external Flash, enter
usbflash:// then the filename or directory name.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
Dell#dir
Directory of flash:
1 -rwx 6478482 May 13 101 16:54:34 E1200.BIN
flash: 64077824 bytes total (57454592 bytes free)
Dell#
Related
Commands
cd – changes the working directory.
format flash (S-Series)
Erase all existing files and reformat the filesystem in the internal flash memory. After the filesystem is
formatted, files cannot be restored.
S4810
Syntax
format flash:
Defaults flash memory
Command
Modes
EXEC Privilege
File Management
69