Dell S4810 - Show Mac Protocol-Queue-Mapping

show mac protocol-queue-mapping
Display the queue mapping for the MAC protocols.
S4810
Syntax
show mac protocol-queue-mapping
Defaults Not configured.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Example
Dell#show mac protocol-queue-mapping
Protocol Destination Mac EtherType Queue EgPort
Rate(kbps)
----------------------------------- ----- ------ -----------
ARP any 0x0806 Q5/Q6 CP _
FRRP 01:01:e8:00:00:10/11 any Q7 CP _
LACP 01:80:c2:00:00:02 0x8809 Q7 CP _
LLDP any 0x88cc Q7 CP _
GVRP 01:80:c2:00:00:21 any Q7 CP _
STP 01:80:c2:00:00:00 any Q7 CP _
ISIS 01:80:c2:00:00:14/15 any Q7 CP _
09:00:2b:00:00:04/05 any Q7 CP
Dell#
Control Plane Policing (CoPP)
517