graceful-restart interval
Set the graceful restart grace period, the time during that all graceful restart attempts are prevented.
S4810
Syntax
graceful-restart interval minutes
To return to the default, use the no graceful-restart interval command.
Parameters
minutes Enter the graceful-restart interval minutes. The range is from
1 to 20 minutes. The default is 5 minutes.
Defaults 5 minutes
Command
Modes
ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.1.0 Introduced on the E-Series.
graceful-restart restart-wait
Enable the graceful restart maximum wait time before a restarting peer comes up.
S4810
Syntax
NOTE: Set the t3 timer to adjacency on the restarting router when
implementing this command.
graceful-restart restart-wait seconds
To return to the default, use the no graceful-restart restart-wait
command.
980
Intermediate System to Intermediate System (IS-IS)
To Next Page
Loading...
