Dell S4810 - Show Run Vrf

default 0 Te 0/0-13,18-47,
Fo 0/48,52,56,60,
Ma 0/0,
Ma 1/0,
Ma 2/0,
Ma 3/0,
Ma 4/0,
Ma 5/0,
Ma 6/0,
Ma 7/0,
Ma 8/0,
Ma 9/0,
Ma 10/0,
Ma 11/0,
Nu 0,
Vl 1
test1 1 Te 0/14,16-17
test2 2 Te 0/15
management 64
FTOS#show ip vrf test1
VRF-Name VRF-ID Interfaces
test1 1 Te 0/14,16-17
show run vrf
Displays configuration information corresponding to all the VRFs in the system.
S4810
Syntax
show run vrf vrf-name
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF..
Command
Modes
• EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Introduced on the S-Series Z-Series.
Version 8.2.1.0 Introduced on the E-Series.
1708
Virtual Routing and Forwarding (VRF)