Dell S4810 - Password

default Enter the keyword default to specify that the default
method list, created in the aaa authentication login
command, is applied to the terminal line.
Defaults No authentication is performed on the console lines. Local authentication is
performed on the virtual terminal and auxiliary lines.
Command
Modes
LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0
Introduced on the E-Series.
Usage
Information
If you configure the aaa authentication login default command, the
login authentication default command automatically is applied to all
terminal lines.
Related
Commands
aaa authentication login — selects the login authentication methods.
password
Specify a password for users on terminal lines.
S4810
Syntax
password [encryption-type] password
To delete a password, use the no password password command.
Parameters
encryption-
type
(OPTIONAL) Enter either zero (0) or 7 as the encryption type
for the password entered. The options are
• 0 is the default and means the password is not encrypted
and stored as clear text.
• 7 means that the password is encrypted and hidden.
1468
Security