Dell S4810 - Traceroute Cache Hold-Time

Defaults none
Command
Modes
ECFM DOMAIN
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
traceroute cache hold-time
Set the amount of time a trace result is cached.
S4810
Syntax
traceroute cache hold-time minutes
Parameters
minutes Enter a hold-time. The range is from 10 to 65535 minutes.
Defaults 100 minutes
Command
Modes
ETHERNET CFM
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
180
802.1ag