Dell S4810 - Show Ethernet Cfm Maintenance-Points Local

Parameters
name | level Enter the maintenance domain name or level.
brief Enter the keyword brief to display a summary output.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
Example
Dell# show ethernet cfm domain
Domain Name: customer
Level: 7
Total Service: 1
Services
MA-Name VLAN CC-Int X-CHK Status
My_MA 200 10s enabled
Domain Name: My_Domain
Level: 6
Total Service: 1
Services
MA-Name VLAN CC-Int X-CHK Status
Your_MA 100 10s enabled
show ethernet cfm maintenance-points local
Display configured MEPs and MIPs.
S4810
Syntax
show ethernet cfm maintenance-points local [mep | mip]
Parameters
mep Enter the keyword mep to display configured MEPs.
mip Enter the keyword mip to display configured MIPs.
Defaults none
Command
Modes
EXEC Privilege
174
802.1ag