Dell S4810 - Redistribute Bgp

Related
Commands
default-information originate — generates a default route into the OSPF routing
domain.
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
S4810
Syntax
redistribute bgp as number [metric metric-value] | [metric-type
type-value] | [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric
metric-value] | [metric-type type-value] [route-map map-name]
[tag
tag-value] command.
Parameters
as number Enter the autonomous system number. The range is from 1
to 65535.
metric metric-
value
(OPTIONAL) Enter the keyword metric then the metric-
value number. The range is from 0 to16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map
map-name
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Defaults none
Command
Modes
ROUTER OSPF
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.3 Added Route Map for BGP Redistribution to OSPF.
1194
Open Shortest Path First (OSPFv2 and OSPFv3)